\Device\Ide\iaStor0 did not respond within the timeout period – Intel RAID

Download PDF

UPDATE 21.09.2013.

DO THIS FIRST.

power-1

 

power-2

 

power-3

 

ALSO, check this out:

http://www.intel.com/support/chipsets/imsm/sb/CS-025783.htm

*********************************************************************************************************************************

ONLY DO THIS IF THE TOP DOESNT WORK.

1. First, check if your hard drive(s) support “Link Power Management (LPM)”. This error usually appears on drives that do not support LPM, “feature described by the Serial ATA specification to overcome the power demand of a high-speed serial interface, SATA and providing the capability of SATA at the minimum power cost.”

 

2. If your drives do not support LPM we can disable it, since default is enabled. To disable LPM selectively by port go to,  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\iaStor\Parameters\Portn\

where n represents the port number, starting from 0. Within each of those keys are the following DWORD values:

LPM: 0 (disable) or 1 (enable); default = enable
LPMSTATE: 0 (partial), 1( slumber); default = disable; ignored when LPM = 0
LPMDSTATE: 0 (partial), 1 (slumber); default = enable
DIPM: 0 (disable), 1 (enable); default = enable

Capture

 

Change the states on all SATA ports, restart the computer.

Hopefully this helps.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply